Available Valves and Manifolds
Our products can be easily customised
Products
Products
GAS VALVE 002G
Valve for cooking appliances with saddle type inlet
OD 32.6 mm x 43.5 mm long*
(1.28 " x 1.71 ")
Can be retrofitted in existing appliance designs.
GAS VALVE MANIFOLD
Custom manifold assembly with several 002G valves
GAS VALVE 008G
Cost effective option of 002G
28 mm x 36 mm x 30.4 mm long*
(1.10 " x 1.42 " x 1.20 ")
Cost reduction without compromising performance.
Any type of custom pess-in fittings.
WATER/STEAM VALVE 006S
Variable control of cold and hot water and steam
OD 32.6 mm x 40.5 mm long*
(1.28 " x 1.60 ")
Has the same advantages as the gas valve and can be easily fitted in the pipelines.
Our current products are electrically controlled variable flow valves for different liquids and gases. Their advantages are: instant response, compact dimensions, embedded shut-off, universality and many others provided with the help of simple and reliable design. The valve's principle of operation can be briefly characterised as a movement of a ferromagnetic occluder inside a fluid passageway under influence of electromagnetic field. This is a patent pending technology, which has been published on the WIPO website:
If you would like to learn more about our product please review the following PDF documents:
Video below shows an example of valve's application when it is used to control gas flow supplied to the burners of cooking appliances.
Reduces time and cost of appliance assembly.
UNCOMMON SIMPLICITY INTO INNOVATION
and in our case, custom design
does not mean extra cost
Video Demonstrations
This video demonstrates a wide range of air flow which can be metered through one model of the SHUKOS Valve and also points the difference between coarse and fine voltage/current control supplied to the valve's input.
GAS VALVE 011G - 15
For industrial gas burners up to 500 MJ (140 kWh or 474 kBTU)
GAS VALVE 011G - 25
For industrial gas burners up to 5,000 MJ (1,400 kWh or 4,740 kBTU)
OD 72.2 mm x 94 mm long*
(2.84 " x 3.70 ")
Similar size valves were also designed for 50 kg/min transportation of LNG and 400 BHP Diesel-Gas engine.
OD 88 mm x 109 mm long*
(3.47 " x 4.29 ")
All Valves provide:
- Variable flow output.
- Instant response.
- Wide rage of flow characteristics.
Note: * Dimension of the length excludes fittings.